Carbon Garnish for the meter cluster installed

Installed the Carbon garnish for the meter cluster today. Was a DIY job, fairly simple and straightforward.

Remove the two screws holding the plastic panel.


There's a hose and a wire connected to it on the left side. I decided to just leave them there and not remove it.


Next unscrew the three screws holding the cluster in place.


Now, I tried removing the cluster but the steering wheel was in the way. So, I decided to just remove the plastic enclosure with the meter cluster still in place. It just a matter of a few clips and it came off.


After adjusting and setting the Carbon garnish in place, just put everything back together the way you took them out and you're all done.


What do you think?